Troubleshooting - Display shows dashes in place of weather data

Display shows dashes in place of weather data

Solution:

Console is not receiving data from the station or the sensors are not properly connected. Check your weather station.

The console’s reception status displays at the lower right corner of the screen. For every data packet received by the console, an “X” flashes. “R” displays when the console is trying to re-establish a lost connection. When no data has been received for 10 minutes, sensor readings are dashed out and an “L” displays (lost signal). Every 15-minutes, the "L“ switches to "R" to check for a signal. You can force the console into "R" mode by holding DONE and down (-), then exiting setup mode by holding DONE.

Feedback and Knowledge Base